西门子电源6EP1334-3BA10

概述

单相和两相 SITOP modular 电源是适用于复杂解决方案的工艺电源，提供了适合在复杂机器设备中使用的极高功能。它们具有超宽输入范围，可与几乎任何单相电源系统相连或直接在三相电网的导线（两相）之间连接，即使具有很大电压波动，也能确保极高的安全性。电源提升功能可在短时间内提供 3 倍额定电流。发生过载时，用户可选择通过自动重启提供恒电流或执行锁定关断。由于效率极高，它们可在控制柜内保持较低的能耗和散热，紧凑的金属外壳还可节省空间。

要进一步提高 24 V 电源的可用性，可将 SITOP modular 电源与缓冲、DC UPS、冗余和选择性模块结合使用。

主要产品亮点

  • 24 V/5 A 和 10 A，也可作为具有带保护涂层的 PCB 的型号提供。

  • 单相和两相，超宽输入范围

  • 超细长型设计 – 无需侧面安装间隙

  • 具有 3 倍额定电流的功率提升（持续 25 ms），适用于跳闸保护装置

  • 具有额定电流的 1.5 倍的额外电源 (5 s/min)，允许短暂的功能过载

  • 可在恒电流和重启之间选择短路响应方式

  • 可针对并联操作进行对称负载分布

  • 通过 3 个 LED 指示运行状态

  • 效率高达 91 %

  • 温度范围宽，-25 ~ +70℃

  • 通过全面，如 cULus、ATEX 或 GL

                           

                           

技术规范

Article number

6EP1333-3BA10

6EP1333-3BA10-8AC0

6EP1334-3BA10

6EP1334-3BA10-8AB0

Product

SITOP PSU200M

SITOP PSU200M

SITOP PSU200M

SITOP PSU200M

Power supply, type

24 V/5 A

24 V/5 A

24 V/10 A

24 V/10 A

Input

Input

1-phase and 2-phase AC

1-phase and 2-phase AC

1-phase and 2-phase AC

1-phase and 2-phase AC

Supply voltage

  • ● 1 at AC

120 ... 230 V

120 ... 230 V

120 ... 230 V

120 ... 230 V

  • ● 2 at AC

230 ... 500 V

230 ... 500 V

230 ... 500 V

230 ... 500 V

  • ● Note

Set by means of selector switch on the device; starting from Vin > 90/180 V

Set by means of selector switch on the device; starting from Vin > 90/180 V

Set by means of selector switch on the device

Set by means of selector switch on the device

Input voltage

  • ● 1 at AC

85 ... 264 V

85 ... 264 V

85 ... 264 V

85 ... 264 V

  • ● 2 at AC

176 ... 550 V

176 ... 550 V

176 ... 550 V

176 ... 550 V

Wide-range input

Yes

Yes

Yes

Yes

Overvoltage resistance

1300 Vpeak, 1.3 ms

1300 Vpeak, 1.3 ms

1300 Vpeak, 1.3 ms

1300 Vpeak, 1.3 ms

Mains buffering at Iout rated, min.

25 ms; at Vin = 120/230 V, typ. 150 ms at Vin = 400 V

25 ms; at Vin = 120/230 V, typ. 150 ms at Vin = 400 V

25 ms; at Vin = 120/230 V, typ. 150 ms at Vin = 400 V

25 ms; at Vin = 120/230 V, typ. 150 ms at Vin = 400 V

Rated line frequency 1

50 Hz

50 Hz

50 Hz

50 Hz

Rated line frequency 2

60 Hz

60 Hz

60 Hz

60 Hz

Rated line range

47 ... 63 Hz

47 ... 63 Hz

47 ... 63 Hz

47 ... 63 Hz

Input current

  • ● at rated input voltage 120 V

2.2 A

2.2 A

4.4 A

4.4 A

  • ● at rated input voltage 230 V

1.2 A

1.2 A

2.4 A

2.4 A

  • ● at rated input voltage 500 V

0.61 A

0.61 A

1.1 A

1.1 A

Switch-on current limiting (+25 °C), max.

35 A

35 A

35 A

35 A

I2t, max.

1.7 A2·s

1.7 A2·s

4 A2·s

4 A2·s

Built-in incoming fuse

T 3.15 A (not accessible)

T 3.15 A (not accessible)

T 6.3 A (not accessible)

T 6.3 A (not accessible)

Protection in the mains power input (IEC 898)

Recommended miniature circuit breaker at 1-phase operation: from 6 A (10 A) characteristic C (B); required at 2-phase operation: circuit breaker 2-pole connected or circuit breaker 3RV2011-1EA10 (setting 3.8 A) or 3RV2711-1ED10 (UL 489) at 230 V; 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489) at 400/500 V

Recommended miniature circuit breaker at 1-phase operation: from 6 A (10 A) characteristic C (B); required at 2-phase operation: circuit breaker 2-pole connected or circuit breaker 3RV2011-1EA10 (setting 3.8 A) or 3RV2711-1ED10 (UL 489) at 230 V; 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489) at 400/500 V

Recommended miniature circuit breaker at 1-phase operation: from 6 A (10 A) characteristic C (B); required at 2-phase operation: circuit breaker 2-pole connected or circuit breaker 3RV2011-1EA10 (setting 3.8 A) or 3RV2711-1ED10 (UL 489) at 230 V; 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489) at 400/500 V

Recommended miniature circuit breaker at 1-phase operation: from 6 A (10 A) characteristic C (B); required at 2-phase operation: circuit breaker 2-pole connected or circuit breaker 3RV2011-1EA10 (setting 3.8 A) or 3RV2711-1ED10 (UL 489) at 230 V; 3RV2011-1DA10 (setting 3 A) or 3RV2711-1DD10 (UL 489) at 400/500 V